Front height and firmness
Identify front height in a side reference. Ask for a firm front without describing an oversized dome; the back and front need to form one wearable proportion.
Use one profile image to identify the forehead angle and another worn view to show the position above the ears. A tall-looking front can result from support, dimensions or camera angle. Before requesting a lower crown, name which feature differs. Check the top and rear as well so the revision preserves a balanced silhouette.
Graphic scale across center seam
Locate the graphic relative to the center seam. Give its finished size and review fine lettering on the decorated sample, not only in a digital mockup.
Artwork crossing a center seam needs review on the finished cap. Mark the logo center and overall boundary, then inspect letters or outlines close to the seam. A larger graphic is not automatically more legible. Ask which details need adjustment and keep any revised artwork file attached to the sample comments.
Name the composition, weight and finish you require. Compare the cloth and decorated sample together.
Illustrative texture; not a certified fabric specification.Snap attachment and adjustment
Specify the snap closure color and the visible rear opening. Include the inside band and label position so adjustment and finishing are part of the same brief.
Test adjustment at the settings intended for the audience. Look at the rear opening, spare tab length and the points where the snap is attached. Matching the closure color in a photograph does not approve its operation. Include the inside band and label in this check because they affect the same wearing area.
Flat visor profile
Compare the front after decoration and the brim in profile. Write down any change to crown height or visor projection before approving the shape.
View the visor edge at eye level and compare both sides. Decide whether the cap should be supplied with a flat profile and discuss the proposed packing arrangement. If a buyer plans to bend it later, that should not replace approval of the shape the factory is expected to deliver.
A practical buying example
A streetwear brief might request a firm front, a flat navy visor and a cream wordmark. If the first sample feels too tall, keep the visor projection and artwork width fixed while reviewing front height. Photograph at the same angle and snap setting. Otherwise a change in how the cap is worn can be mistaken for a successful pattern revision.
Questions to settle before requesting a sample
Choose a classic snapback when the defined front and flat visor are deliberate. Compare a softer baseball cap if the desired fit is more relaxed. Before quoting, settle the full colorway, embroidery positions and closure specification. Ask to review the final decorated crown rather than approving embroidery and fit as unrelated samples.
